https://dgcommunity.pulsemicro.com/topic539-applying-hoops.aspx Tajima DG by Pulse Community - Technical Assistance - applying hoops - Messages en-us http://blogs.law.harvard.edu/tech/rss Jitbit AspNetForum Mon, 09 Sep 2019 20:16:04 GMT Mon, 09 Sep 2019 20:16:04 GMT https://dgcommunity.pulsemicro.com/topic539-applying-hoops.aspx Hello DonDingo,

In the current version of Tajima DG16 by Pulse, when a hoop is added, it will center itself on the 0, 0 measurement.

To be close to the center when you add a hoop, you could either:

1. Add the hoop before creating a design
2. Recenter the workspace to 0, 0 (easiest way is to zoom out slightly before starting to design) and make the design there so that when the hoop appears, it will be shown around your design.

Currently when DG16 loads, 0,0 will be in the top left corner so that it's easy to create designs at the desired height and width you want. We will investigate whether it makes more sense to move the default location of the screen or of the hoop.

Thank you for bringing this issue to our attention.]]> Mon, 09 Sep 2019 20:16:04 GMT https://dgcommunity.pulsemicro.com/topic539-applying-hoops.aspx edited by DonDingo on 8/30/2019]]> Fri, 30 Aug 2019 15:10:46 GMT https://dgcommunity.pulsemicro.com/topic539-applying-hoops.aspx Fri, 12 Jul 2019 18:04:06 GMT