HomeDG16 General Discussion

Talk about anything related to Tajima DG16 by Pulse here

Jump Stitches Messages in this topic - RSS

LissaBakke
LissaBakke
Posts: 4


12/27/2021
LissaBakke
LissaBakke
Posts: 4
I have an image with several letters where some are generating jump stitches and some are not. The smart jump is set to .08in and and all the starts and stops are well within that range and there are no locks added to the stitches. I have circled the ones that are a problem on the attached image. Can anyone help me figure out why this is happening and how to fix it?

Attachments:
Jump stitches.PNG
0 link
AndiCrew
AndiCrew
Posts: 1


1/25/2022
AndiCrew
AndiCrew
Posts: 1
If you tighten up your needle thread, reduce the tension of the needle thread.
For embroidery, and zig-zag, and because the needle makes side movements, it needs more needle thread.
So try to keep you needle thread not very tight,
and tight up your bobbin case tension more, so that the two threads meet under the material.

--
Cheap embroidery digitizing
0 link






Powered by Jitbit Forum 8.3.7.0 © 2006-2013 Jitbit Software