HomeDG16 Bug Reports

Experiencing an issue that needs to be fixed? Tell us here!

Pulse Software shows design sent to Tajima machine Messages in this topic - RSS

alwaysworkin
alwaysworkin
Posts: 3


2/22/2022
alwaysworkin
alwaysworkin
Posts: 3
Software shows design sent to machine but Tajima machine gives Lan error. I am hard wired from computer to machine. Spooler setting set to: "Always use the spooler running on local computer". If I have it set to: "Locate" it has LOTS of trouble finding the spooler. I have to constantly "stop spooler" then "start spooler" three or four times for the software to find it. Then it will time out after about 30 minutes if left idle. How do I fix this? This is an ongoing problem and extremely frustrating.
0 link
pulse_keri40
pulse_keri40
Posts: 8


2/22/2022
pulse_keri40
pulse_keri40
Posts: 8
Hello please submit a ticket for this issue to:
https://pulsemicro.freshdesk.com/

We will reach out to our local distributor to help resolve this issue.
0 link
alwaysworkin
alwaysworkin
Posts: 3


2/22/2022
alwaysworkin
alwaysworkin
Posts: 3
Hirsch Tajima reached out.....it might be fixed now. Thank you.
0 link






Powered by Jitbit Forum 8.3.7.0 © 2006-2013 Jitbit Software