HomeDG/ML General Discussion

Discuss anything related to Tajima DG/ML14 by Pulse or earlier versions here

Draw Fusion in DG/ML 14 Messages in this topic - RSS

dbrokenburr
dbrokenburr
Posts: 2


4/22/2015
dbrokenburr
dbrokenburr
Posts: 2
Hello, everyone. I am running DG/ML version 14 on a Windows 7 machine. Also use CorelDraw X6. Everything worked fine (getting designs from Corel via Draw Fusion) until about a week or so ago. Now fail to create Corel is the error message I get when I click on DrawFusion. I have recently deleted several unused programs. thinking I deleted something I shouldn't have, I repaired both Corel X6 and DG/ML 14. DrawFusion worked once after the repairs of X6 and once after I repaired DG/ML. But not today. Has anyone else had this problem and if so how was it corrected? Thank you very much for your help. --Deborah
0 link
PulseMicro
PulseMicro
Administrator
Posts: 359


4/22/2015
PulseMicro
PulseMicro
Administrator
Posts: 359
Hello Deborah,

If you contact your local Pulse distributor about your issue, their support team should be able to assist you with this issue.

If you're unsure about who to contact, you can find a list of distributors on our DG15 website here:
http://embroidery.pulsemicro.com/find-a-distributor.html
0 link
TOGMark
TOGMark
Posts: 6


4/23/2015
TOGMark
TOGMark
Posts: 6
dbrokenburr wrote:
Hello, everyone. I am running DG/ML version 14 on a Windows 7 machine. Also use CorelDraw X6. Everything worked fine (getting designs from Corel via Draw Fusion) until about a week or so ago. Now fail to create Corel is the error message I get when I click on DrawFusion. I have recently deleted several unused programs. thinking I deleted something I shouldn't have, I repaired both Corel X6 and DG/ML 14. DrawFusion worked once after the repairs of X6 and once after I repaired DG/ML. But not today. Has anyone else had this problem and if so how was it corrected? Thank you very much for your help. --Deborah

If you have System Restore turned on, restoring your system to a point in time prior to when you deleted things might work, as long as you are not running in a corporate environment (sometimes corporate network administrators use software that establishes a trust relationship with your PC, and system restore can break that). Click Start, right-click on Computer, click Properties, click System Protection. Then you can see if it's turned on, etc.
0 link
dbrokenburr
dbrokenburr
Posts: 2


4/23/2015
dbrokenburr
dbrokenburr
Posts: 2
Thank you. It is turned on. I will give that a try.
0 link
samx5453
samx5453
Posts: 1


4/28/2015
samx5453
samx5453
Posts: 1
I am trying to use the draw fusion tool in my Tajima DG/ML version 14 (creator) program but every time a message comes up saying "Failed to create Corel". We are currently running CorelDraw 7 on the same computer. Are these 2 programs not compatible or is there a step I am missing? Thanks!
0 link
PulseMicro
PulseMicro
Administrator
Posts: 359


5/1/2015
PulseMicro
PulseMicro
Administrator
Posts: 359
samx5453 wrote:
I am trying to use the draw fusion tool in my Tajima DG/ML version 14 (creator) program but every time a message comes up saying "Failed to create Corel". We are currently running CorelDraw 7 on the same computer. Are these 2 programs not compatible or is there a step I am missing? Thanks!



Hi Samx5453,

Unfortunately, Tajima DG/ML14 is not compatible with CorelDraw 7. If you are using DGML14, you are able to use CorelDraw 6 or earlier for DrawFusion.

CorelDraw x7 is compatible with DrawFusion in DG15 though.
0 link
AZIEHAN
AZIEHAN
Posts: 3


6/23/2015
AZIEHAN
AZIEHAN
Posts: 3
hi,
I m using dgml 12 on window 8, i want to know how to open my artwok in corel draw x6 to dgml12
0 link
PulseMicro
PulseMicro
Administrator
Posts: 359


6/23/2015
PulseMicro
PulseMicro
Administrator
Posts: 359
AZIEHAN wrote:
hi,
I m using dgml 12 on window 8, i want to know how to open my artwok in corel draw x6 to dgml12



Hello AZIEHAN,

Are you trying to use the Import Artwork button? Or are you trying to use import via DrawFusion?

If you are trying to use DrawFusion and receive the "Failed to create DrawFusion" notification, this is because CorelDraw x6 is not compatible with DG/ML12 unfortunately. If this isn't your issue, we may need to see a sample of the files you're trying to import to resolve the issue.
0 link
AZIEHAN
AZIEHAN
Posts: 3


7/28/2015
AZIEHAN
AZIEHAN
Posts: 3
yes, u are right that masage prompt out when i click draw fusion button, so what the best corel draw are u suggest sir/madam for my dgml12?
0 link
PulseMicro
PulseMicro
Administrator
Posts: 359


7/28/2015
PulseMicro
PulseMicro
Administrator
Posts: 359
AZIEHAN wrote:
yes, u are right that masage prompt out when i click draw fusion button, so what the best corel draw are u suggest sir/madam for my dgml12?



Hello AZIEHAN,

For DGML12, you would need to use CorelDRAW x3 or x4.

I must note that DGML12 is not supported by distributors anymore though, so if you have any issues you will need to upgrade to a newer version of DG to receive assistance.
0 link






Powered by Jitbit Forum 8.3.7.0 © 2006-2013 Jitbit Software