Talk about anything related to Tajima DG16 by Pulse here
Tajima DG16 adding command stop
|
hlgearheart Posts: 5
1/17/2019
|
Since upgrading from DG15 to DG16 Creator PXF and DST files are being created with a STOP after the first segment. My TFMX stops with a normal stop green screen and waits for me to press start again. If I have an empty screen on the Machine and do not read the condition file during LAN transfer it does not have a stop. Of course then you have to set all the thread colors manually. Is there a configuration file that I need to use or modify to get this to quit happening? In my Design Properties config, I use Tajima as my default machine format. Is there a Setting in Machine Format that needs to be set?
edited by hlgearheart on 1/18/2019
--
Howard Gearheart
www.gearheartembroidery.com
No Job Too Small
|
|
|
0
link
|
|
DancingBayLLC Posts: 14
1/23/2019
|
I have a TFMX 1504, a TEMX 1501, and a TEJT2. I get the stop command on the TFMX and the TEMX, but not on the TEJT. I am networked and so push my designs to the machines. Drives me crazy that I have to take that stop out every time I load a design on one of those 2 machines. Hope it gets resolved soon.
|
|
|
0
link
|